Sundance-spas Maxxus Bedienungsanleitung PDF herunterladen (Seite 20)

Page 17

WARMER AND COOLER BUTTONS

The hot tub’s thermostat is to provide you with optimum control of the hot

tub water temperature. This temperature set point can be adjusted from 65˚F

(18˚C) to 104˚F (40˚C). In conjunction with setting the temperature, these

two buttons are used in changing the filter cycles (see “Selecting Filter

Cycles”, page 18).

LIGHT

The control panel button labeled LIGHT activates the underwater hot tub light

when depressed and the LED indicator light above this sensor comes on

when the hot tub light is turned on. The light has a one hour default.

There are two colored lenses included with your hot tub which may be placed

over the light lens inside the hot tub. To remove a lens, simply rotate it coun-

terclockwise and pull.

JETS OR JETS 1

The JETS OR JETS 1 button controls the 2-speed pump. Pressing this but-

ton switches the pump from off, to low speed, to high speed, and back to off.

JETS 2

The JETS 2 button controls the high speed pump 2 featured on Palermo and

Bahia models.

JETS 1

JETS 2

COOLER

LIGHT WARMER

Illustration No. 7

Palermo and Bahia

Digital Command Center

Light

indicator

Red LED display: can shown current water temperature,

set water temperature, error messages, and filter modes.

Controls

light

Controls

2-speed

pump 1

Pump 1

indicator

These buttons:

1. Display temperature setting.

2. Change temperature setting.

3. Perform other programming

functions.

Controls

high speed

pump 2

Pump 2

indicator

Indicates

heater is on.

1 2 ... 15 16 17 18 19 20 21 22 23 24 25 ... 36 37

Kommentare zu diesen Handbüchern

Keine Kommentare

Sundance-spas Maxxus Bedienungsanleitung Seite 20

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Küche Sundance-spas Maxxus