Sundance-spas ST201 Bedienungsanleitung PDF herunterladen (Seite 64)

Sundance Technology ST201 PRELIMINARY draft 2

INTENABLE

Class....................I/O Registers, Interrupt

Base Address ......IoBaseAddress register value

Address Offset.....0x4c

Access Mode.......Read/Write

Width ...................16 bits

Enables individual interrupts as specified in the IntStatus register. Setting a bit in IntEnable will allow the

specific source to generate an interrupt on the PCI bus. IntEnable is cleared upon reset. IntEnable is also

cleared by a read of IntStatusAck.

BIT BIT NAME BIT DESCRIPTION

0 Unused This bit will be ignored.

1 EnHostError Enables the HostError interrupt.

2 EnTxComplete Enables the TxComplete interrupt.

3 EnMACControl-

Frame

Enables the MACControlFrame interrupt.

4 EnRxComplete Enables the RxComplete interrupt.

5 EnRxEarly Enables the RxEarly interrupt.

6 EnInRequested Enables the InRequested interrupt.

7 EnUpdateStats Enables the UpdateStats interrupt.

8 EnLinkEvent Enables the LinkEvent interrupt.

9 EnTxDMACom-

plete

Enables the TxDMAComplete interrupt.

10 EnRxDMACom-

plete

Enables the RxDMAComplete interrupt.

15..11 Unused These bits bill be ignored.

1 2 ... 59 60 61 62 63 64 65 66 67 68 69 ... 144 145

Keine Kommentare

Sundance-spas ST201 Bedienungsanleitung Seite 64